What should I do if I find that the Computer fan does not turn when installing and using the Charging station?
Release time:
2023-07-24 10:39
Source:
As a more marked equipment for new energy development, the importance of Charging station is self-evident. Most of the current Charging station support fast charging. Vehicles with a mileage of 300 kilometers can charge only 80% or more in 20 minutes, which is already very fast.
During fast charging, the Charging station is usually equipped with Computer fan as standard due to its high power and high heat output. Each Charging station is equipped with 2 to 4 Computer fan. If the Charging station is used, it is found that the Charging station Computer fan has no hot air, no heat emission, or no fan noise, it can basically be judged that the Computer fan does not rotate. The Computer fan outlet is usually located in the middle and upper part of the Charging station, and its surface is honeycomb mesh. Normal operation involves blowing out heat.
What should I do if I find that the Computer fan does not turn when installing and using the Charging station?
In case that the Computer fan of the Charging station does not rotate and cannot work normally, the charging should be stopped in time, the plug should be disconnected, and the Charging station should be kept away in time to avoid accidents due to excessive internal temperature of the Charging station. In addition, there is no need to worry too much. The Charging station has its own temperature alarm function and fault alarm function, which can automatically play a protective role.
The reason why the Computer fan does not rotate was found during the installation and use of the Charging station
1. Fan failure: It may be due to the fan itself malfunction, and a new fan needs to be replaced.
2. Fan blockage: It may be due to fan blockage, and it is necessary to clean the fan to remove dust and debris.
3. Loose fan interface: It may be due to loose fan interface. It is necessary to check if the power and data interfaces of the fan are loose and reconnect them.
4. Fault circuit: It may be the circuit fault of the control fan or other circuit faults, and it is necessary to check whether the circuit connection is normal,
Special attention: The above issues require contacting professional technical personnel or manufacturer personnel for repair or replacement. In any case, do not disassemble or repair the Charging station without permission to avoid unnecessary loss and danger.
Related News
How to use Computer fan correctly?
Improper use of Computer fan not only affects the service life, but also affects the use efficiency of the equipment, which will lead to equipment failure and greater economic losses. In addition to strictly following the instructions for installation and operation, the following steps should also be followed:
As a more marked equipment for new energy development, the importance of Charging station is self-evident. Most of the current Charging station support fast charging. Vehicles with a mileage of 300 kilometers can charge only 80% or more in 20 minutes, which is already very fast.
Do photovoltaic equipment need to be waterproof when using Computer fan?
When using Computer fan for photovoltaic equipment, it is generally necessary to consider the waterproof problem. Because photovoltaic modules are often installed outdoors, such as on roofs, fields, outdoor building areas, etc., if waterproofing is not considered, it may cause equipment to become damp, short-circuit, or other malfunctions.
On the Importance of Computer fan to Equipment
Computer fan plays a vital role in equipment operation. Equipment generates a large amount of heat during operation, and if it cannot be discharged in a timely manner, it will affect the performance and lifespan of the equipment. Therefore, the appearance of Computer fan solves this problem and provides an effective cooling method for equipment.
Benefits of using PBT material for Computer fan frame blades
The advantages of using PBT material for Computer fan are: Excellent mechanical properties: PBT has excellent mechanical properties, with superior impact strength, fatigue resistance, and wear resistance compared to other engineering plastics. This makes PBT one of the ideal materials for manufacturing Machine element, which can meet the requirements of high performance and complex design.
Maintenance steps of Charging station fan
The maintenance steps of Charging station fan are as follows: 1. Disconnect the power supply: before carrying out any maintenance work, be sure to disconnect the power supply of the Charging station to ensure safety. 2. Remove the fan cover: use the corresponding tools to remove the fan cover from the Charging station. Be careful not to damage any parts.
Tel: +86-769-38948008
Mobile: +86-13632532850
Email: cslthit@163.com
Add.: Dongguan City, Guangdong Province, China
Follow Us:
